Sensors

ANT+ bike-light control

Pair a compatible ANT+ light, check its battery, and control the modes it supports.
In this guide

Pair the light

  1. Make sure the selected bike has a reachable ANT+-capable shifting controller.
  2. Open Bike Setup > Sensors > Add > Bike Light.
  3. Turn on the light and place it in ANT+ pairing mode.
  4. Select the detected light and complete verification.

Available controls

After pairing, BikeNet shows the information and controls that the light reports. Depending on the model, that may include battery level, available modes, individual LEDs, low and high beam, brightness, or automatic intensity. If a control is missing, the light probably does not expose it over ANT+.

What to check before riding

Modes and behavior are determined by the light’s own firmware, so two ANT+ lights may offer different controls. Test the light while the bike is stationary: confirm that each mode does what you expect, that the physical buttons still work, and that the battery has enough charge.

Do not depend on app control as the only way to operate a safety light. Make sure you know how to control it directly if the bike system or phone disconnects.